Front Wheel Bearings Revisited

[scirocco_88_16v@hotmail.com (Brian Wagner)]

Na Larry shoot a little PB Blaster on then first. That'll work just fine.

Brian

>From: "Larry" <rocco16v@netzero.com>
>Reply-To: "Larry" <rocco16v@netzero.com>
>To: "ATS - Patrick Bureau" <pbureau@attbi.com>, "Christopher Grossi" 
><cgrossi@dwc.edu>, <scirocco-l@scirocco.org>
>Subject: Re: Front Wheel Bearings Revisited
>Date: Wed, 20 Mar 2002 21:18:37 -0800
>
>Wonderful.  I just bought a press to do my front wheel bearings with and
>it's a 12 ton.......this means my bearings will probably require 12.5T to
>remove them......
>
>Larry   sandiego16V
>
> > Chris,
> >
> > I have done this 2 weeks ago.. and it took 12 ton pressure to remove the
> > bearings from the Hub (thank you again brian for the 25ton press)
> > I will write the pictugram tech note tomorow so you can take a look at
>what
> > your getting into.
> > but count 20 mins per side to remove the assembly, and reinstall, and
>about
> > 30 mins per bearing to remove and press in if you never changed them 
>like
> > mine where (eh not bad 16 years on front bearing..lololol)
> >
> > ATS - Patrick
>
>
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l


_________________________________________________________________
Join the world’s largest e-mail service with MSN Hotmail. 
http://www.hotmail.com