headlight relays

[Larry" <rocco16v@netzero.com (Larry)]

B&A-
 I used 10ga. ... probably overkill, but it doesn't hurt.
Since I'm running 90/100W bulbs,  I used a 35A relay for the two low beams,
and a 35A relay for each pair of high beams, for a total of three relays.
Each relay is fused.  Added good grounds, just as John did.
  Been working without problems for almost two years.

Larry  sandiego16V

----- Original Message -----
From: Bob & Ann <angus6@socket.net>
To: list <scirocco-l@scirocco.org>
Sent: Thursday, June 06, 2002 6:51 PM
Subject: headlight relays


> okay got some new headlights to install, been looking at going the relay
> route setup and some off the setups I've seen use 1 relay for each light
and
> some use 1 for high and 1 for low, is the 4 setup over kill??
>   some pick up juice from the battery and some come off the alternator,
what
> is the best way??
>  plan on using 12 gauge wire or should i use 10 instead?
>  how have you guys been doing this up date?
> TIA
> Bob
> 87 16V
> 81 8V dead in garage still
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>