[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
oil temp sensor
There should be a small nail-head type connection on the back of the block
near the drivers side of the head. If your talking about a 16v then this is
where the oil-temp stock gage sender is located. You can use that if you
are wanting to replace the stock gage. If you are refering to an 8v, I'm
unsure of where the oil-temp sending unit is located.
William
----- Original Message -----
From: "breandan mcilwain" <irisheet@yahoo.com>
To: "scirocco list" <scirocco-l@scirocco.org>
Sent: Saturday, June 01, 2002 11:07 AM
Subject: oil temp sensor
> i need to know where to mount this on the car. i cant
> put it on the oil cooler, there is no space or is
> there. this is an autometer electrical guage. i
> thought about using the place on the side of the head
> where the stock sendor was but when i took that out of
> the head i found out that it is a coolant passage and
> wont be accurate for the oil temperature. any ideas?
>
> thanks
>
> breandan l mcilwain
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! - Official partner of 2002 FIFA World Cup
> http://fifaworldcup.yahoo.com
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l