[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Arg!

I'm running a 40,000 volt coil with OEM wires and don't 
get any arcing.  I don't think you should have a problem 
with your wires.  Especially since they are relatively 
new.

John


On Mon, 29 Jul 2002 10:40:19 -0700
  "Tyler P." <ty@festf.org> wrote:
>The thing is that they say the wires are actually arcing 
>on the manifold and
>that you can see it.  I never watched the engine run over 
>the weekend cause
>I've been so busy but like I said that seems like a 
>pretty extreme change
>for wires to naturally go over such a short period of 
>time.  
>
>-----Original Message-----
>From: John Erickson [mailto:ranahan@charter.net]
>Sent: Monday, July 29, 2002 10:24 AM
>To: Tyler P.; List (E-mail)
>Subject: Re: Arg!
>
>
>Take a multimeter (or borrow one) and measure the 
>resistance on the wires.  It should be between 5500-7500 
>ohms.  If its more, you need new wires.  If not, those 
>guys are, well, it sounds like you have a few adjectives 
>you'd like to use.
>
>John
>Long Beach
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l