[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Flange cap seals
This is a multi-part message in MIME format.
--Boundary_(ID_Un6cz9gGXQg4XNo+62tegQ)
Content-type: text/plain; charset=iso-8859-1
Content-transfer-encoding: 7BIT
sounds like he drilled a hole in the center of it to pop it back off. probably forgot the circlip or something. or he didnt replace the cap at all on that side and reused the old one.
Al
----- Original Message -----
From: DEMETRIS RAPTIS
To: scirocco-l@scirocco.org
Sent: Thursday, July 25, 2002 7:48 AM
Subject: Flange cap seals
I replaced both flange seals on the FN tranny. the outer big ones. I also replaced both the caps/seals that reside inside the flanges. But the one on the drivers side had a hole in it,it was machined on the joint side . My mechanic had replaced that cap 20K miles ago. Is it possible he put the wrong one? I thought there was only "one size fits all",
What would cause that to happen ? improper installation?
Demetri
--Boundary_(ID_Un6cz9gGXQg4XNo+62tegQ)
Content-type: text/html; charset=iso-8859-1
Content-transfer-encoding: 7BIT
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1065" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>sounds like he drilled a hole in the center of it
to pop it back off. probably forgot the circlip or something. or he didnt
replace the cap at all on that side and reused the old one.</FONT></DIV>
<DIV><FONT face=Arial size=2>Al</FONT></DIV>
<DIV> </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=raver@prodigy.net href="mailto:raver@prodigy.net">DEMETRIS RAPTIS</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=scirocco-l@scirocco.org
href="mailto:scirocco-l@scirocco.org">scirocco-l@scirocco.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, July 25, 2002 7:48
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Flange cap seals</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>I replaced both flange seals on the FN tranny.
the outer big ones. I also replaced both the caps/seals that reside inside the
flanges. But the one on the drivers side had a hole in it,it was machined on
the joint side . My mechanic had replaced that cap 20K miles ago. Is it
possible he put the wrong one? I thought there was only "one size fits
all",</FONT></DIV>
<DIV><FONT face=Arial size=2>What would cause that to happen ? improper
installation?</FONT></DIV>
<DIV><FONT face=Arial size=2>Demetri</FONT></DIV></BLOCKQUOTE></BODY></HTML>
--Boundary_(ID_Un6cz9gGXQg4XNo+62tegQ)--