[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Newbie......HELP!!
- Subject: Newbie......HELP!!
- From: juliemac57@hotmail.com (Julie Macfarlane)
- Date: Thu, 25 Jul 2002 11:41:42 +0000
Sounds like the wires are off or the gap is wrong. recheck the gap of the
plugs first. set them to 0.024 with a leaf gauge.
Facing the car, cyl#1 is by the timing belt, numbering to 4 left to right.
Lift the cap. Around the rim of the dist where the cap will rest you will
find a small mark (line) showing Cyl#1's position. useing a 19mm wrench line
up the tick mark on the inside of the timing belt pully with the top/front
of the valve cover. This should line up the mark on the dist with the mark
of Cyl#1. If not. Then where ever the rotor points is cyl#1.
Clockwise from this position on the dist, it will go
1 : 4 ; 3 ;2.
Good luck
>From: Erik Seo <joemomma2002@yahoo.com>
>To: scirocco-l@scirocco.org
>Subject: Newbie......HELP!!
>Date: Wed, 24 Jul 2002 22:24:51 -0700 (PDT)
>
>Hi everyone, newbie here.
>
>Just got my first Scirocco, a 1980 Rocco.
>So, I'm learning about auto maintenence.....I decided
>to change my spark plug wires. After the change, the
>car started and ran real rough. It would only rev
>about half as fast from idle (only 300-500 rpm's) to
>redline. Real slow, and it sounded and felt horrible,
>sounded kind of like it was stuttering and sputtering
>up.
>
>Help!
>
>__________________________________________________
>Do You Yahoo!?
>Yahoo! Health - Feel better, live better
>http://health.yahoo.com
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l
Julie Macfarlane
(Web Developer, Unemployed)
Albany NY
Charter Member "Scirocco Anonymous"
'85 8v-?? Scarlett
'81 16v-2Y (FronkenDad)
ICQ: 7704980
AOL: Rocc Queen
http://216.153.141.3/scirocco/
_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx