[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Car Seats (again)
- Subject: Car Seats (again)
- From: bhonnold@pac-cap.com (BcH)
- Date: Tue, 23 Jul 2002 14:20:54 -0700
- In-reply-to: <C434A1A59F0DC141B1589A40411EE744105695@pcmserver01.Pacificcapital.local>
This is a multi-part message in MIME format.
------=_NextPart_000_002C_01C23254.2838ADC0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Julie, do those three points have the ratcheting mechanism like modern
belts? Where if you pull it out all the way it retracts and clicks, then
you can't pull it again until you let the belt retract all the way?
BcH
78 MkI Ragtop ABA 16vT boxes of parts
> -----Original Message-----
> From: scirocco-l-admin@scirocco.org
> [mailto:scirocco-l-admin@scirocco.org]On Behalf Of Julie Macfarlane
> Sent: Tuesday, July 23, 2002 2:13 PM
> To: pbureau@attbi.com; ranahan@charter.net; scirocco-l@scirocco.org
> Subject: RE: Car Seats (again)
>
>
> How about a 1981 16v conversion. Takes a bit of welding or
> fabrication to
> mount the adjustment point. But it works. The top attachment
> is about 1/2
> way down the C pillar. The floor attachment goes where the
> seat belt was
> attached and the supply reel is attached to the side where on
> of the clips
> held the side panel on.
> The center join takes a bit of drilling & welding to hold the
> buckle piece.
>
> Simple and fast.
>
>
> >From: "ATS - Patrick Bureau" <pbureau@attbi.com>
> >To: "John Erickson" <ranahan@charter.net>,<scirocco-l@scirocco.org>
> >Subject: RE: Car Seats (again)
> >Date: Tue, 23 Jul 2002 14:44:10 -0500
> >
> >Actually I beleive they actually had trear seat restrains at
> the shoulders
> >certains years in certain location for certain models of scirocco's
> >I know its a lots of uncertainty eh? Maybe dirk can help on
> this one...
> >
> >or even better, who has shoulder restrain seat bealt system
> in the rear in
> >their rocco's (I know there are at least 3 I ahve seen/heard
> about in teh
> >few past year now!) speak up folks, and tell us where you
> got them (year,
> >model, make of car, location).
> >
> >
> >==========================================
> >ATS - Patrick Bureau
> >1985 8v **Planning 3A/JH Upgrade**
> >1985 8v ** Titian Project **
> >1988 16v ** Sold **
> >Web Site : http://longcoeur.com/scirocco
> >
> >
> >=>-----Original Message-----
> >=>From: scirocco-l-admin@scirocco.org
> >=>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of John Erickson
> >=>Sent: Tuesday, July 23, 2002 12:47 PM
> >=>To: scirocco-l@scirocco.org
> >=>Subject: Car Seats (again)
> >=>
> >=>
> >=>I've got a 35 lb. three-year-old I keep buckled up in the
> >=>back seat. I have a big car seat with a five point
> >=>harness that I've been using, but he's getting too big for
> >=>it and the combination of him and the seat is definitely
> >=>getting too big for the back seat. Because we don't have
> >=>shoulder belts in back, I can't use a regular booster
> >=>seat. I need either a booster seat with its own belts and
> >=>a tether(I haven't been able to find one)or I need to
> >=>install a shoulder belt in the back. Have any of you come
> >=>up with a workable solution?
> >=>
> >=>BTW, I love keeping the mini-van in the garage and hauling
> >=>kids in the Scirocco - so do the kids.
> >=>
> >=>John
> >=>87 16v
> >=>Long Beach, CA
> >=>
> >=>_______________________________________________
> >=>Scirocco-l mailing list
> >=>Scirocco-l@scirocco.org
> >=>http://neubayern.net/mailman/listinfo/scirocco-l
> >
> >
> >_______________________________________________
> >Scirocco-l mailing list
> >Scirocco-l@scirocco.org
> >http://neubayern.net/mailman/listinfo/scirocco-l
>
>
>
>
> Julie Macfarlane
> (Web Developer, Unemployed)
> Albany NY
> Charter Member "Scirocco Anonymous"
> '85 8v-?? Scarlett
> '81 16v-2Y (FronkenDad)
> ICQ: 7704980
> AOL: Rocc Queen
> http://216.153.141.3/scirocco/
>
>
> _________________________________________________________________
> MSN Photos is the easiest way to share and print your photos:
> http://photos.msn.com/support/worldwide.aspx
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>
------=_NextPart_000_002C_01C23254.2838ADC0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3DWindows-1252">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
6.0.5762.3">
<TITLE>RE: Car Seats (again)</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->
<P><FONT SIZE=3D2>Julie, do those three points have the ratcheting =
mechanism like modern belts? Where if you pull it out all the way =
it retracts and clicks, then you can't pull it again until you let the =
belt retract all the way?</FONT></P>
<P><FONT SIZE=3D2>BcH</FONT>
<BR><FONT SIZE=3D2>78 MkI Ragtop ABA 16vT boxes of parts</FONT>
</P>
<BR>
<P><FONT SIZE=3D2>> -----Original Message-----</FONT>
<BR><FONT SIZE=3D2>> From: scirocco-l-admin@scirocco.org</FONT>
<BR><FONT SIZE=3D2>> [<A =
HREF=3D"mailto:scirocco-l-admin@scirocco.org">mailto:scirocco-l-admin@sci=
rocco.org</A>]On Behalf Of Julie Macfarlane</FONT>
<BR><FONT SIZE=3D2>> Sent: Tuesday, July 23, 2002 2:13 PM</FONT>
<BR><FONT SIZE=3D2>> To: pbureau@attbi.com; ranahan@charter.net; =
scirocco-l@scirocco.org</FONT>
<BR><FONT SIZE=3D2>> Subject: RE: Car Seats (again)</FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> How about a 1981 16v conversion. Takes a bit of =
welding or </FONT>
<BR><FONT SIZE=3D2>> fabrication to </FONT>
<BR><FONT SIZE=3D2>> mount the adjustment point. But it works. The =
top attachment </FONT>
<BR><FONT SIZE=3D2>> is about 1/2 </FONT>
<BR><FONT SIZE=3D2>> way down the C pillar. The floor attachment goes =
where the </FONT>
<BR><FONT SIZE=3D2>> seat belt was </FONT>
<BR><FONT SIZE=3D2>> attached and the supply reel is attached to the =
side where on </FONT>
<BR><FONT SIZE=3D2>> of the clips </FONT>
<BR><FONT SIZE=3D2>> held the side panel on.</FONT>
<BR><FONT SIZE=3D2>> The center join takes a bit of drilling & =
welding to hold the </FONT>
<BR><FONT SIZE=3D2>> buckle piece.</FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> Simple and fast.</FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> >From: "ATS - Patrick Bureau" =
<pbureau@attbi.com></FONT>
<BR><FONT SIZE=3D2>> >To: "John Erickson" =
<ranahan@charter.net>,<scirocco-l@scirocco.org></FONT>
<BR><FONT SIZE=3D2>> >Subject: RE: Car Seats (again)</FONT>
<BR><FONT SIZE=3D2>> >Date: Tue, 23 Jul 2002 14:44:10 -0500</FONT>
<BR><FONT SIZE=3D2>> ></FONT>
<BR><FONT SIZE=3D2>> >Actually I beleive they actually had trear =
seat restrains at </FONT>
<BR><FONT SIZE=3D2>> the shoulders</FONT>
<BR><FONT SIZE=3D2>> >certains years in certain location for =
certain models of scirocco's</FONT>
<BR><FONT SIZE=3D2>> >I know its a lots of uncertainty eh? =
Maybe dirk can help on </FONT>
<BR><FONT SIZE=3D2>> this one...</FONT>
<BR><FONT SIZE=3D2>> ></FONT>
<BR><FONT SIZE=3D2>> >or even better, who has shoulder restrain =
seat bealt system </FONT>
<BR><FONT SIZE=3D2>> in the rear in</FONT>
<BR><FONT SIZE=3D2>> >their rocco's (I know there are at least 3 I =
ahve seen/heard </FONT>
<BR><FONT SIZE=3D2>> about in teh</FONT>
<BR><FONT SIZE=3D2>> >few past year now!) speak up folks, and tell =
us where you </FONT>
<BR><FONT SIZE=3D2>> got them (year,</FONT>
<BR><FONT SIZE=3D2>> >model, make of car, location).</FONT>
<BR><FONT SIZE=3D2>> ></FONT>
<BR><FONT SIZE=3D2>> ></FONT>
<BR><FONT SIZE=3D2>> =
>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D</FONT>
<BR><FONT SIZE=3D2>> >ATS - Patrick Bureau</FONT>
<BR><FONT SIZE=3D2>> >1985 8v **Planning 3A/JH =
Upgrade**</FONT>
<BR><FONT SIZE=3D2>> >1985 8v ** Titian Project **</FONT>
<BR><FONT SIZE=3D2>> >1988 16v ** Sold **</FONT>
<BR><FONT SIZE=3D2>> >Web Site : <A =
HREF=3D"http://longcoeur.com/scirocco">http://longcoeur.com/scirocco</A><=
/FONT>
<BR><FONT SIZE=3D2>> ></FONT>
<BR><FONT SIZE=3D2>> ></FONT>
<BR><FONT SIZE=3D2>> >=3D>-----Original Message-----</FONT>
<BR><FONT SIZE=3D2>> >=3D>From: =
scirocco-l-admin@scirocco.org</FONT>
<BR><FONT SIZE=3D2>> >=3D>[<A =
HREF=3D"mailto:scirocco-l-admin@scirocco.org">mailto:scirocco-l-admin@sci=
rocco.org</A>]On Behalf Of John Erickson</FONT>
<BR><FONT SIZE=3D2>> >=3D>Sent: Tuesday, July 23, 2002 12:47 =
PM</FONT>
<BR><FONT SIZE=3D2>> >=3D>To: scirocco-l@scirocco.org</FONT>
<BR><FONT SIZE=3D2>> >=3D>Subject: Car Seats (again)</FONT>
<BR><FONT SIZE=3D2>> >=3D></FONT>
<BR><FONT SIZE=3D2>> >=3D></FONT>
<BR><FONT SIZE=3D2>> >=3D>I've got a 35 lb. three-year-old I =
keep buckled up in the</FONT>
<BR><FONT SIZE=3D2>> >=3D>back seat. I have a big car =
seat with a five point</FONT>
<BR><FONT SIZE=3D2>> >=3D>harness that I've been using, but =
he's getting too big for</FONT>
<BR><FONT SIZE=3D2>> >=3D>it and the combination of him and the =
seat is definitely</FONT>
<BR><FONT SIZE=3D2>> >=3D>getting too big for the back =
seat. Because we don't have</FONT>
<BR><FONT SIZE=3D2>> >=3D>shoulder belts in back, I can't use a =
regular booster</FONT>
<BR><FONT SIZE=3D2>> >=3D>seat. I need either a booster =
seat with its own belts and</FONT>
<BR><FONT SIZE=3D2>> >=3D>a tether(I haven't been able to find =
one)or I need to</FONT>
<BR><FONT SIZE=3D2>> >=3D>install a shoulder belt in the =
back. Have any of you come</FONT>
<BR><FONT SIZE=3D2>> >=3D>up with a workable solution?</FONT>
<BR><FONT SIZE=3D2>> >=3D></FONT>
<BR><FONT SIZE=3D2>> >=3D>BTW, I love keeping the mini-van in =
the garage and hauling</FONT>
<BR><FONT SIZE=3D2>> >=3D>kids in the Scirocco - so do the =
kids.</FONT>
<BR><FONT SIZE=3D2>> >=3D></FONT>
<BR><FONT SIZE=3D2>> >=3D>John</FONT>
<BR><FONT SIZE=3D2>> >=3D>87 16v</FONT>
<BR><FONT SIZE=3D2>> >=3D>Long Beach, CA</FONT>
<BR><FONT SIZE=3D2>> >=3D></FONT>
<BR><FONT SIZE=3D2>> =
>=3D>_______________________________________________</FONT>
<BR><FONT SIZE=3D2>> >=3D>Scirocco-l mailing list</FONT>
<BR><FONT SIZE=3D2>> >=3D>Scirocco-l@scirocco.org</FONT>
<BR><FONT SIZE=3D2>> >=3D><A =
HREF=3D"http://neubayern.net/mailman/listinfo/scirocco-l">http://neubayer=
n.net/mailman/listinfo/scirocco-l</A></FONT>
<BR><FONT SIZE=3D2>> ></FONT>
<BR><FONT SIZE=3D2>> ></FONT>
<BR><FONT SIZE=3D2>> =
>_______________________________________________</FONT>
<BR><FONT SIZE=3D2>> >Scirocco-l mailing list</FONT>
<BR><FONT SIZE=3D2>> >Scirocco-l@scirocco.org</FONT>
<BR><FONT SIZE=3D2>> ><A =
HREF=3D"http://neubayern.net/mailman/listinfo/scirocco-l">http://neubayer=
n.net/mailman/listinfo/scirocco-l</A></FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> Julie Macfarlane</FONT>
<BR><FONT SIZE=3D2>> (Web Developer, Unemployed)</FONT>
<BR><FONT SIZE=3D2>> Albany NY</FONT>
<BR><FONT SIZE=3D2>> Charter Member "Scirocco =
Anonymous"</FONT>
<BR><FONT SIZE=3D2>> '85 8v-?? Scarlett</FONT>
<BR><FONT SIZE=3D2>> '81 16v-2Y (FronkenDad)</FONT>
<BR><FONT SIZE=3D2>> ICQ: 7704980</FONT>
<BR><FONT SIZE=3D2>> AOL: Rocc Queen</FONT>
<BR><FONT SIZE=3D2>> <A =
HREF=3D"http://216.153.141.3/scirocco/">http://216.153.141.3/scirocco/</A=
></FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> =
_________________________________________________________________</FONT>
<BR><FONT SIZE=3D2>> MSN Photos is the easiest way to share and print =
your photos: </FONT>
<BR><FONT SIZE=3D2>> <A =
HREF=3D"http://photos.msn.com/support/worldwide.aspx">http://photos.msn.c=
om/support/worldwide.aspx</A></FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> =
_______________________________________________</FONT>
<BR><FONT SIZE=3D2>> Scirocco-l mailing list</FONT>
<BR><FONT SIZE=3D2>> Scirocco-l@scirocco.org</FONT>
<BR><FONT SIZE=3D2>> <A =
HREF=3D"http://neubayern.net/mailman/listinfo/scirocco-l">http://neubayer=
n.net/mailman/listinfo/scirocco-l</A></FONT>
<BR><FONT SIZE=3D2>> </FONT>
</P>
</BODY>
</HTML>
------=_NextPart_000_002C_01C23254.2838ADC0--