[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Master cylinder question
- Subject: Master cylinder question
- From: bhonnold@pac-cap.com (BcH)
- Date: Tue, 23 Jul 2002 09:15:18 -0700
- In-reply-to: <C434A1A59F0DC141B1589A40411EE744105654@pcmserver01.Pacificcapital.local>
This is a multi-part message in MIME format.
------=_NextPart_000_0002_01C23229.77E01FA0
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Your stock pedals will work, you simply need to fabricate a clevis extension
to use anything but the 16v roc brake booster/pedal cluster. There is a
hole in the stock MkI and early MkII brake pedal in exactly the right place
and it is also very easy to mount the brake light switch to the stock pedal
cluster.
BcH
78 MkI Ragtop ABA 16vT boxes of parts
> -----Original Message-----
> From: scirocco-l-admin@scirocco.org
> [mailto:scirocco-l-admin@scirocco.org]On Behalf Of Ben Beacock
> Sent: Tuesday, July 23, 2002 8:48 AM
> To: Scirocco. org Mailing List
> Subject: RE: Master cylinder question
>
>
> Yours died too? That's nuts. Mine started going bad Friday
> night, then
> went real bad about 1km from the show. So I wasted $15 on an
> autocross,
> but got to park real close. I figure the new disc conversion in the
> back made the master start going deeper and catching a ridge.
>
> Anyway, I'm in the process of tracking down the stuff I need
> to upgrade
> to a 22mm master. Things I have:
>
> Passat 22mm master/booster/pedals (I pretty sure the pedals
> won't work)
> 86 Golf 8V 20mm master/booster/pedals
> American Rabbit booster/pedals
>
> If I get desperate, my friend has the Scirocco 16V pedals and booster,
> but I'd like to avoid spending money at the moment.
> Waterfest tapped me
> out and I didn't even buy anything.
>
> Ben
>
>
>
>
> -----Original Message-----
> From: scirocco-l-admin@scirocco.org
> [mailto:scirocco-l-admin@scirocco.org] On Behalf Of Cathy Boyko
> Sent: July 23, 2002 1:08 AM
> To: scirocco-l@scirocco.org
> Subject: Master cylinder question
>
> Well, the time has come for my MC to be replaced. Any suggestions? One
> person
> suggested going to a G-61, but the numbers don't have a lot of meaning
> for me
> I'm afraid. Is there any opinion on this? I don't usually
> miss a chance
> to
> upgrade, but if stock is the way to go, that's good too. It
> will likley
> be a
> "put this on and never mess with it forever" sort of deal, so I may as
> well do
> it right.
>
> LMK what you think, but it's gotta go soon, I may get the replacement
> tomorrow.
>
> Cathy, anticipating your input.
>
>
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>
------=_NextPart_000_0002_01C23229.77E01FA0
Content-Type: text/html;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3DWindows-1252">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
6.0.5762.3">
<TITLE>RE: Master cylinder question</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->
<P><FONT SIZE=3D2>Your stock pedals will work, you simply need to =
fabricate a clevis extension to use anything but the 16v roc brake =
booster/pedal cluster. There is a hole in the stock MkI and early =
MkII brake pedal in exactly the right place and it is also very easy to =
mount the brake light switch to the stock pedal cluster.</FONT></P>
<P><FONT SIZE=3D2>BcH</FONT>
<BR><FONT SIZE=3D2>78 MkI Ragtop ABA 16vT boxes of parts</FONT>
</P>
<BR>
<P><FONT SIZE=3D2>> -----Original Message-----</FONT>
<BR><FONT SIZE=3D2>> From: scirocco-l-admin@scirocco.org</FONT>
<BR><FONT SIZE=3D2>> [<A =
HREF=3D"mailto:scirocco-l-admin@scirocco.org";>mailto:scirocco-l-admin@sci=
rocco.org</A>]On Behalf Of Ben Beacock</FONT>
<BR><FONT SIZE=3D2>> Sent: Tuesday, July 23, 2002 8:48 AM</FONT>
<BR><FONT SIZE=3D2>> To: Scirocco. org Mailing List</FONT>
<BR><FONT SIZE=3D2>> Subject: RE: Master cylinder question</FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> Yours died too? That's nuts. Mine =
started going bad Friday </FONT>
<BR><FONT SIZE=3D2>> night, then</FONT>
<BR><FONT SIZE=3D2>> went real bad about 1km from the show. So =
I wasted $15 on an </FONT>
<BR><FONT SIZE=3D2>> autocross,</FONT>
<BR><FONT SIZE=3D2>> but got to park real close. I figure the =
new disc conversion in the</FONT>
<BR><FONT SIZE=3D2>> back made the master start going deeper and =
catching a ridge. </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> Anyway, I'm in the process of tracking down the =
stuff I need </FONT>
<BR><FONT SIZE=3D2>> to upgrade</FONT>
<BR><FONT SIZE=3D2>> to a 22mm master. Things I =
have:</FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> Passat 22mm master/booster/pedals (I pretty sure =
the pedals </FONT>
<BR><FONT SIZE=3D2>> won't work)</FONT>
<BR><FONT SIZE=3D2>> 86 Golf 8V 20mm master/booster/pedals </FONT>
<BR><FONT SIZE=3D2>> American Rabbit booster/pedals </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> If I get desperate, my friend has the Scirocco =
16V pedals and booster,</FONT>
<BR><FONT SIZE=3D2>> but I'd like to avoid spending money at the =
moment. </FONT>
<BR><FONT SIZE=3D2>> Waterfest tapped me</FONT>
<BR><FONT SIZE=3D2>> out and I didn't even buy anything.</FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> Ben</FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> -----Original Message-----</FONT>
<BR><FONT SIZE=3D2>> From: scirocco-l-admin@scirocco.org</FONT>
<BR><FONT SIZE=3D2>> [<A =
HREF=3D"mailto:scirocco-l-admin@scirocco.org";>mailto:scirocco-l-admin@sci=
rocco.org</A>] On Behalf Of Cathy Boyko</FONT>
<BR><FONT SIZE=3D2>> Sent: July 23, 2002 1:08 AM</FONT>
<BR><FONT SIZE=3D2>> To: scirocco-l@scirocco.org</FONT>
<BR><FONT SIZE=3D2>> Subject: Master cylinder question</FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> Well, the time has come for my MC to be =
replaced. Any suggestions? One</FONT>
<BR><FONT SIZE=3D2>> person</FONT>
<BR><FONT SIZE=3D2>> suggested going to a G-61, but the numbers don't =
have a lot of meaning</FONT>
<BR><FONT SIZE=3D2>> for me</FONT>
<BR><FONT SIZE=3D2>> I'm afraid. Is there any opinion on this? =
I don't usually </FONT>
<BR><FONT SIZE=3D2>> miss a chance</FONT>
<BR><FONT SIZE=3D2>> to</FONT>
<BR><FONT SIZE=3D2>> upgrade, but if stock is the way to go, that's =
good too. It </FONT>
<BR><FONT SIZE=3D2>> will likley</FONT>
<BR><FONT SIZE=3D2>> be a</FONT>
<BR><FONT SIZE=3D2>> "put this on and never mess with it =
forever" sort of deal, so I may as</FONT>
<BR><FONT SIZE=3D2>> well do</FONT>
<BR><FONT SIZE=3D2>> it right. </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> LMK what you think, but it's gotta go soon, I =
may get the replacement</FONT>
<BR><FONT SIZE=3D2>> tomorrow. </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> Cathy, anticipating your input.</FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> =
_______________________________________________</FONT>
<BR><FONT SIZE=3D2>> Scirocco-l mailing list</FONT>
<BR><FONT SIZE=3D2>> Scirocco-l@scirocco.org</FONT>
<BR><FONT SIZE=3D2>> <A =
HREF=3D"http://neubayern.net/mailman/listinfo/scirocco-l";>http://neubayer=
n.net/mailman/listinfo/scirocco-l</A></FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> </FONT>
<BR><FONT SIZE=3D2>> =
_______________________________________________</FONT>
<BR><FONT SIZE=3D2>> Scirocco-l mailing list</FONT>
<BR><FONT SIZE=3D2>> Scirocco-l@scirocco.org</FONT>
<BR><FONT SIZE=3D2>> <A =
HREF=3D"http://neubayern.net/mailman/listinfo/scirocco-l";>http://neubayer=
n.net/mailman/listinfo/scirocco-l</A></FONT>
<BR><FONT SIZE=3D2>> </FONT>
</P>
</BODY>
</HTML>
------=_NextPart_000_0002_01C23229.77E01FA0--