[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Supercharger, was: Re: turbo 'rocs
I was going to try and retrofit a set of sodium filled valves into the JH
head as I don't want ato use a hyrdo head on the car. I need to double
check all the dimension to make sure I can do that though. I hadn't
thought about using a corrado block but it does make sense.
Alan
----- Original Message -----
From: <LXVTEC@aol.com>
To: ""Scirocco-Al"" <scirocco-Al@insight.rr.com>; <scirocco-l@scirocco.org>
Sent: Wednesday, July 17, 2002 10:57 PM
Subject: Re: Supercharger, was: Re: turbo 'rocs
Alan,
I would look into a PG block as it is from a Corrado G60 and already setup
for digifant and a supercharger. the mounts should be able to be modified
for your Supercharger and the brackets for the alternator and everything
else would be pretty much good to go for you with minimal modifications.
Also the head is hydraulic and uses sodium filled valves.
HTH
Masun Dixon
78 Scirocco 16V
87 Scirocco 16V