100MM axles into 90M hubs.

[jdbubb@ix.netcom.com (Dan Bubb)]

My 84 needed later hub carriers to install the 100mm axles. I'm thinking
that (speaking just about Scirocco's) that if it didn't come with 100mm
axles you should plan on having to change the hub carriers also.
ETKA only shows two hub carriers with switch over at 53-E-012 218. Looks
like the change over was not specific to the 16V.
Dan

----- Original Message -----
From: Dave Ewing <rabbit16v@attbi.com>
To: Scirocco List <scirocco-l@scirocco.org>
Sent: Saturday, July 13, 2002 4:00 AM
Subject: Re: 100MM axles into 90M hubs.


> Depends.  Which year do you plan on doing this to?  I think 84 on are able
> to take the 100mm axles, not positive but pretty sure.  I think Chris
might
> know!!
>
> Dave
>
> > Can you use 100MM axles in 90MM hubs? What has to be done to get them to
> fit.
> > Masun Dixon
> > 78 Scirocco 16V
> > 87 Scirocco 16V
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> >
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l