[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

CV joints once more

This is a multi-part message in MIME format.

--Boundary_(ID_SXkkJdiA9HLrUxj8W/cRQQ)
Content-type: text/plain; charset=iso-8859-1
Content-transfer-encoding: 7BIT

the rieger has an fn with 100mm half shafts (including the inners). as far as outers, if a 100 fits and works, then a 90 will. there are some 90mm hubs that wont properly fit a 100mm outer cv though.
Al

  ----- Original Message ----- 
  From: DEMETRIS RAPTIS 
  To: scirocco-l@scirocco.org 
  Sent: Wednesday, July 03, 2002 9:04 AM
  Subject: CV joints once more


  It's a 16V with a FN tranny. The PO gave me a receipt listing the FN installation along witha set of axles. I assume these are axles with 90mm joints. A year later an outer joint blew and my mechanic replaced it witha joint part 191 498 099B which seems to be a 100mm joint. 
  Is it posible to mate a 100mm outer joint to an axle that originally had 90mm outer joint?
  Will both 90,100mm outer joint engage the wheel hub without a problem?
  can I use axles with 90mm inners and 100mm outers?
  Demetri

--Boundary_(ID_SXkkJdiA9HLrUxj8W/cRQQ)
Content-type: text/html; charset=iso-8859-1
Content-transfer-encoding: 7BIT

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2715.400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>the rieger has an fn with 100mm half shafts 
(including the inners). as far as outers, if a 100 fits and works, then a 90 
will. there are some 90mm hubs that wont properly fit a 100mm outer cv 
though.</FONT></DIV>
<DIV><FONT face=Arial size=2>Al</FONT></DIV>
<DIV>&nbsp;</DIV>
<BLOCKQUOTE dir=ltr 
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV 
  style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> 
  <A title=raver@prodigy.net href="mailto:raver@prodigy.net";>DEMETRIS RAPTIS</A> 
  </DIV>
  <DIV style="FONT: 10pt arial"><B>To:</B> <A title=scirocco-l@scirocco.org 
  href="mailto:scirocco-l@scirocco.org";>scirocco-l@scirocco.org</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, July 03, 2002 9:04 
  AM</DIV>
  <DIV style="FONT: 10pt arial"><B>Subject:</B> CV joints once more</DIV>
  <DIV><BR></DIV>
  <DIV><FONT face=Arial size=2>It's a 16V with a FN tranny. The PO gave me a 
  receipt listing the FN installation along witha set of axles. I assume these 
  are axles with 90mm joints. A year later an outer joint blew and my mechanic 
  replaced it witha joint part 191 498 099B which seems to be a 100mm joint. 
  </FONT></DIV>
  <DIV><FONT face=Arial size=2>Is it posible to mate a 100mm outer joint to an 
  axle that originally had 90mm outer joint?</FONT></DIV>
  <DIV><FONT face=Arial size=2>Will both 90,100mm outer joint engage the wheel 
  hub without a problem?</FONT></DIV>
  <DIV><FONT face=Arial size=2>can I use axles with 90mm inners and 100mm 
  outers?</FONT></DIV>
  <DIV><FONT face=Arial size=2>Demetri</FONT></DIV></BLOCKQUOTE></BODY></HTML>

--Boundary_(ID_SXkkJdiA9HLrUxj8W/cRQQ)--