removed A/C - Waterpump pulley

[onesixv@juno.com (Eric L Ellis)]

I'd think a shim that fit AND gave you peace of mind would be
considerably more trouble than welding the pulley.

EE
"Good, bad...I'm the guy with the gun!"
http://www.geocities.com/blitzkrieg16v
AOL IM:  OneSixV
http://www.geocities.com/onesixv

On Wed, 3 Jul 2002 15:02:21 -0600 "Ken B" <Indiana_Red@hotmail.com>
writes:
> Standard Scirocco 16v motor removed A/C and P/S.
> I am using the inner pulley on my water pump with the crank and the 
> alt w/
> the longer pulley.  They line up very close but the problem is that 
> the
> Outer pulley is the one that drives the water pump.  No matter how 
> tight the
> 6mm allen bolts are, the inner one still turns but not the 
> outer...meaning
> no water pumping.
> I have seen posts that say they have had the two spot welded 
> together.  Any
> other way?  Maybe a flat ring like shim that could transfer pressure 
> from
> the other pulley?
> 
> Ken
> 1979 Scirocco  "McFly"
> 16v conversion "...it's working....It's WORKING...!"
> tracing electrical gremlins now...
> VORTEX:  "Indiana Red"
> 
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
> 

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.