[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
vacuum hose question to U.S. listers
- Subject: vacuum hose question to U.S. listers
- From: flaatr@yahoo.com (Euroroc II)
- Date: Mon, 01 Jul 2002 10:31:41 -0700
- In-reply-to: <IMEIILEDMBCOMEJNDNBIMEJACPAA.pbureau@attbi.com>
- References: <002a01c21dac$70402e70$5201a8c0@schneider>
Vacuum line and sender on MFA Clusters only...
-Raffi
At 07:35 AM 6/30/02 -0500, you wrote:
>HUmm no no vaccum hose to my instrument cluster my 85 nor my 88 16v...
>what is the vaccum hose for anyways?
>
>==========================================
>ATS - Patrick Bureau
>1985 8v **Planning 3A/JH Upgrade**
>1988 16v ** Euro Project/maybe 8v **
>Web Site : http://longcoeur.com/scirocco
>
>
>=>-----Original Message-----
>=>From: scirocco-l-admin@scirocco.org
>=>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of Dirk
>=>Sent: Thursday, June 27, 2002 2:30 AM
>=>To: scirocco-l@scirocco.org
>=>Subject: vacuum hose question to U.S. listers
>=>
>=>
>=>Hello listers,
>=>currently I'm trying to explain Craig ( U.S. Scirocco driver )
>=>how to install the DIGIFIZ.
>=>
>=>He told me that he has no vacuum hose that attaches to the back of
>=>the instrument cluster on his Scirocco 16V.
>=>
>=>Is that possible ?
>=>Were there Sciroccos without vacuum hose to the cluster in the USA ?
>=>I'm sure that all german 16V had these.
>=>
>=>
>=>curious
>=>Dirk
>=>
>=>
>=>
>=>
>=>Hello Craig,
>=>
>=>every single one of my Sciroccos ( about 15 ) had a vacuum hose
>=>attached to
>=>the cluster.
>=>However, this might be different on U.S. models.
>=>
>=>I will ask on the U.S. Scirocco mailing list to be sure.
>=>
>=>If you don't have the vacuum hose, it's possible to create one,
>=>using an Y-adapter and 20 inch of vacuum hose.
>=>
>=>I will look for details later....
>=>
>=>Greets
>=>Dirk
>=> ----- Original Message -----
>=> From: Craig Surian
>=> To: Dirk Schneider
>=> Sent: Thursday, June 27, 2002 3:19 AM
>=> Subject: Re: Digifiz
>=>
>=>
>=> Hey Dirk!,
>=>
>=> I don't believe my car has a fuel consumption gage. I can't find the
>=>pressure hose to attach to the pressure sensor. I don't recall detatching
>=>one; is that possible. and if so can I create one?
>=>
>=> many thanks,
>=> Craig
>=>
>=>
>=> you wrote this to me in an email:
>=> the DIGIFIZ calculates the fuel consumption itself,
>=> it uses data that it gets from the digital waysensor, and from the
>=>vacuum-hose that
>=> you have attached to the pressure sensor ( we talked about that
>=>earlier )
>=>
>=>
>=>
>=>
>=>
>=>_______________________________________________
>=>Scirocco-l mailing list
>=>Scirocco-l@scirocco.org
>=>http://neubayern.net/mailman/listinfo/scirocco-l
>=>
>
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l