[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

NO START ?

>uncle rocco wont start.  I have no voltage at the ignition control 
>unit.  Bentley says it may be ignition switch...anybody had this 
>problem?
>
>Steve Szuba
>Callaway Turbo Scirocco #10
>Uncle Rocco

Yes, this could be the switch.  If you pull the plastic off the 
bottom of the steering
column, you can pull the wiring plug from the back of the ignition 
switch.  Using
your handy Bentley, id the proper wires for 'on' and 'start', then 
hotwire the car by
using a couple of jumper wires.  If the car then turns over, it was 
the switch.  If
not, keep looking.  If you'd like to know exactly which wires to jump 
for 'on' and 'start'
I'll get the info and email it out.

==Brett

-- 
  \/  `87 Scirocco 2.0t project | "Hot VW's, take two home. They're small"
\/\/ '88 Scirocco 16v,  '84 Scirocco ITB racer project | - brett@netacc.net