[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
5-bolt patterns
and if you replaced the current stud with removable studs and drilled the
face plate for 5x100, you would now have 2 options to mount 2 kind of wheels
on 1 hub by using removable studs (I know I am crazy just thinking out loud
early in the morning again )
-------------------------------------------------------
__ __________
/ |/_ __/ ___/ Patrick Bureau
//| | / / \__ \ 1985 8v Prowler Orange "Beatrice"
/ _ |/ / ___/ / 1985 8v Titian Red "Lucky"
/_/ |_/_/ /____/ http://www.longcoeur.com/scirocco
=>-----Original Message-----
=>From: scirocco-l-admin@scirocco.org
=>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of Larry
=>Sent: Saturday, August 03, 2002 10:28 PM
=>To: Euroroc II
=>Cc: scirocco-l@scirocco.org
=>Subject: Re: 5-bolt patterns
=>
=>
=>Raff-
=> Your comment on the 5x100/4x100 bolt patterns got my curiousity going....
=>so I checked, using my hubs and a 5x100pattern on a mylar template.
=> You CAN drill a five-bolt pattern on the hubs without interference with
=>the four-bolt pattern (you will use one of the four existing holes). It
=>will be close, but it is quite do-able.
=>
=>Larry
=>
=>
=>-------------------------------------------
=>Introducing NetZero Long Distance
=>Unlimited Long Distance only $29.95/ month!
=>Sign Up Today! www.netzerolongdistance.com
=>
=>_______________________________________________
=>Scirocco-l mailing list
=>Scirocco-l@scirocco.org
=>http://neubayern.net/mailman/listinfo/scirocco-l