[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
New Clutch and Flywheel questions

Subject: New Clutch and Flywheel questions
From: scirocco_88_16v@hotmail.com (Brian Wagner)
Date: Wed, 17 Apr 2002 15:26:52 -0500
Nuetral Corners Please.

Dan not are all as knowledgable as you (bowing to your feet, LOL) remember 
once before the diety status. You yourself asked questions and didn't expect 
to get flamed, it sucked when you did (but you felt better about it when 
someone explained it to you properly and with respect) . Have a beer and 
relax, think about it.

Brian



>From: "Jeff Toomasson" <jtoomasson@yahoo.com>
>To: <jdbubb@ix.netcom.com>
>CC: <scirocco-l@scirocco.org>
>Subject: Re: New Clutch and Flywheel questions
>Date: Wed, 17 Apr 2002 12:45:49 -0700
>
>Look, man - believe me, I'm not saying don't offer your knowledge. You
>obviously know a lot more than mmost of us. And I'm not saying sincerity
>makes up for bad information either.
>
>I'm just saying you don't have to be such a jerk about it. Get over
>yourself.
>
>Do you really laugh your ass off when someone on this list screws up? Too
>bad.
>----- Original Message -----
>From: "Dan Bubb" <jdbubb@ix.netcom.com>
>To: "Jeff Toomasson" <jtoomasson@yahoo.com>
>Cc: <scirocco-l@scirocco.org>
>Sent: Wednesday, April 17, 2002 12:44 PM
>Subject: Re: New Clutch and Flywheel questions
>
>
> > Well, of course, you are correct.
> > I really think that as long as you are sincere while you're spewing out
> > gross misinformation that'll stop somebody dead in their tracks in the
> > middle of a project that that will be quite alright.
> > But, just to bow to your superior sensibilities, I won't bother to
> > correct any more. I'll just sit back and laugh my ass off and wonder how
> > it is possible for some people to be so wrong and think they are
> > "supporting" the group.
> > Have a nice day yourself!
> > Which, of course, we all know in these modern days means "Fuck you very
> > much!"
> >
> >
> >
> > Jeff Toomasson wrote:
> > >
> > > Sorry, there - Turbo. Didn't mean to chafe ya that badly.
> > >
> > > I guess I might have been confused on a couple of things. It turns out 
>I
> > > wasn't clear about the use of a 210mm disc in an early 020 and the
>mention
> > > of the driveshafts were only if he had a 16v tranny that he was 
>swapping
>in.
> > > I realize he didn't say that and, in general, I apologize for sending
>out
> > > bad info. However, in my defense, I did ask for more details...
> > >
> > > But one thing I am not confused about, O Grand Wizard of Volkswagen
> > > engineering, is that your attitude F*CKING SUCKS!
> > >
> > > "Some of the misinformation on this list is really starting to bother
>me!"
> > >
> > > Well - maybe some of us are tired of the way you shit on anyone who
>offers
> > > something incorrect. At least they are being helpful enough to try to
>offer
> > > their perspective, correct or not.
> > >
> > > We all want correct information and while stressing the validity of 
>that
> > > information is tantamount to what this list is about, you might want 
>to
>take
> > > step back and picture how you're portraying yourself with your
>Venus-Flytrap
> > > temper. If you don't care about that - then, fine. I feel sorry for 
>you.
> > > Have a nice day.
> > >
> > > My irritated $0.02, JT
> > > ----- Original Message -----
> > > From: "Dan Bubb" <jdbubb@ix.netcom.com>
> > > To: "Jeff Toomasson" <jtoomasson@yahoo.com>
> > > Cc: <WaspHwy@aol.com>; <scirocco-l@scirocco.org>
> > > Sent: Wednesday, April 17, 2002 11:41 AM
> > > Subject: Re: New Clutch and Flywheel questions
> > >
> > > > NO! NO! NO!
> > > > There is no difference in the bell housing between a 4K and 9A
> > > > tranmission!
> > > > A 4K will work fine with the 3A and the 210mm clutch as will the 
>90mm
> > > > axles.
> > > >
> > > > Some of the misinformation on this list is really starting to bother
>me!
> > > > Let's all work on accurate and knowledgable information.
> > > > Dan
> > > >
> > > >
> > > > Jeff Toomasson wrote:
> > > > >
> > > > > I hope you already have the 16v transmission with
>appropriately-sized
> > > > > driveshaft flanges....The 210mm clutch setup won't fit into the 4k
>bell
> > > > > housing (I assuming that's what you have b/c that's what came 
>stock
>in
> > > the
> > > > > 84 GTi). And the stock driveshafts are 90mm versus the 100mm for 
>the
>16v
> > > > > trannys...
> > > > >
> > > > > Provide more details about what you currently have and I'm sure we
>all
> > > can
> > > > > give you an accurate assessment...
> > > > >
> > > > > Jeff
> > > > > ----- Original Message -----
> > > > > From: <WaspHwy@aol.com>
> > > > > To: <scirocco-l@scirocco.org>
> > > > > Cc: <mk1gti@egroups.com>
> > > > > Sent: Wednesday, April 17, 2002 10:32 AM
> > > > > Subject: New Clutch and Flywheel questions
> > > > >
> > > > > > I am going to be installing (finally) my audi 3a in my 84 gti. I
>am
> > > gonna
> > > > > put
> > > > > > a new clutch in (16v PP) and a lightened flywheel at the same
>time.
> > > > > question:
> > > > > > do I need to do anything to the motor/trans to prepare them for
>the
> > > 210mm
> > > > > > swap, or is it a direct replacement? thanks
> > > > > >
> > > > > > _______________________________________________
> > > > > > Scirocco-l mailing list
> > > > > > Scirocco-l@scirocco.org
> > > > > > http://neubayern.net/mailman/listinfo/scirocco-l
> > > > >
> > > > > _________________________________________________________
> > > > > Do You Yahoo!?
> > > > > Get your free @yahoo.com address at http://mail.yahoo.com
> > > > >
> > > > > _______________________________________________
> > > > > Scirocco-l mailing list
> > > > > Scirocco-l@scirocco.org
> > > > > http://neubayern.net/mailman/listinfo/scirocco-l
> > >
> > > _________________________________________________________
> > >
> > > Do You Yahoo!?
> > >
> > > Get your free @yahoo.com address at http://mail.yahoo.com
>
>
>_________________________________________________________
>Do You Yahoo!?
>Get your free @yahoo.com address at http://mail.yahoo.com
>
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l


_________________________________________________________________
Join the world’s largest e-mail service with MSN Hotmail. 
http://www.hotmail.com
Prev by Date: New Clutch and Flywheel questions
Next by Date: Almost Stranded. Help
Previous by thread: New Clutch and Flywheel questions
Next by thread: Almost Stranded. Help
Index(es):
- Date
- Thread