[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
A/C Q for whoever may know....
something i did not mention...it is not acceptable to use hot shot to top
off a R12 system. all the old R12 must be removed from the system. hot shot
is made up of R22, which is most commonly found in household appliances. and
is also has very small amounts of propane and some other refrigerants that i
can't remember off the top of my head. because it is a mixture of different
refrigerants, it must always be charged as a liquid, otherwise you will
change the characteristics of it greatly.
----- Original Message -----
From: "Larry" <rocco16v@netzero.com>
To: "MrAudi" <vze3pj7t@verizon.net>; "Rick Kellner" <rfkellner@snet.net>;
"scirocco-mail list" <Scirocco-L@scirocco.org>
Sent: Monday, April 08, 2002 7:42 PM
Subject: Re: A/C Q for whoever may know....
> Now, THAT'S why this list exists!! For information like this, from
experts
> like Mr. A....
>
> Larry sandiego16v
>
> > my .02 on 134A refrigerant. i am a refrigeration tech. there is a R12
> > substitute available it is called "Hot Shot" or better known as R414B.
it
> is
> > a direct drop in, and does not require changing access fittings or oil.
> > ----- Original Message -----
> > From: "Rick Kellner" <rfkellner@snet.net>
> > To: <scirocco-l@scirocco.org>
> > Sent: Monday, April 08, 2002 5:04 PM
> > Subject: Re: A/C Q for whoever may know....
> >
> >
> > > John,
> > > Yes it is the receiver/dryer. As soon as they are exposed to open
> > > environment they try to dry it out and fail. Only buy a new one, I
> think
> > > they are about $50 at the local parts store. Don't forget the
> > lubricating
> > > oil you add in with the refrigerant. And finally, are you converting
to
> > the
> > > new refrigerant?
> > >
> > > ----- Original Message -----
> > > From: "John C. Worden" <scirocco@powerlink.net>
> > > To: <scirocco-l@scirocco.org>
> > > Sent: Monday, April 08, 2002 11:58 AM
> > > Subject: A/C Q for whoever may know....
> > >
> > >
> > > > The '78 had no compressor installed when I got it, but I found one
> > > > locally(just got to pick it up still).
> > > > I seem to recall listers mentioning you have to replace something in
> the
> > > > system(besides refrigerant)
> > > > for it to work right. So that is the question what needs to be
> > > > replaced? The receiver/dryer comes to
> > > > mind, but I am not sure. Thanks.
> > > >
> > > >
> > > >
> > > > John C. Worden
> > > > Bucksport, Maine
> > > >
> > > > '98 Dakota 4x4-Just rolled 100K
> > > > '86 Scirocco 8V-
> > > > '81 Scirocco 2.0 16V -
> > > > '78 Scirocco Brazil Brown Metallic, 4 speed.
> > > >
> > >
> > >
> > > _______________________________________________
> > > Scirocco-l mailing list
> > > Scirocco-l@scirocco.org
> > > http://neubayern.net/mailman/listinfo/scirocco-l
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> >
>
>