RE: 2H vs. 4K vs. FK - which is best for 16v

["Neal Tovsen" <sixteen.volt@verizon.net>]

Well, one solution would be to get different inner CV joints, but a
transmission with 90mm flanges won't simply "bolt-in" by itself.

Also remember that Steven mentioned that he has a souped 2.0L 16v. While
90mm flanges would probably survive, at least for a while, I would want all
the beefiness I could get!

Neal

> -----Original Message-----
> From: Foxx (in a box) [mailto:foxxinabox@copper.net]
> Sent: Sunday, September 16, 2001 9:35 PM
> To: Neal Tovsen
> Cc: Steven Mikolajczuk; Scirocco-l
> Subject: Re: 2H vs. 4K vs. FK - which is best for 16v
>
>
> > One potential issue: While I think you can retro-fit 100mm
> output shafts on
> > a 4K, I think someone told me you couldn't do it to a 2H. This
> would be a
> > problem on a 16v...
>
>   why? can't one put 90mm axles on a 16v? i know the flanges are
> different sizes, but the wheel hubs are the same (just did it this
> weekend - 4k to 9a).
>
> --
>  /\_/\	  Foxx (in a box)
> < o o >	  http://foxx.tripod.com
>   \ /
>    °
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org