RE: Playing with suspension bits

[Colin <cwass99@home.com>]

     Oops...my bad :(  I do know the difference between a bolt and a nut,
apparently my typing finger doesn't.
     Of the 4 dust covers involved in my adventures (2 balljoint, 2 tie-rod
ends) one actually didn't split.  Replaced it anyhow.  Alignment is planned for
very early next week.

Cheers,
Colin


On 18-Oct-01 Fry, Larry wrote:
> In case Colin's advice on the "bolt" that holds the axle onto the hub has
> confused any of the new-to-the-mechanical-bits-people on the list, it isn't
> a bolt...it's a big nut.  (those two terms cannot be used interchangably)
> The rest of his advice is spot-on and well-written.  I would add that when
> you use the pickle-fork to release the ball joints/tie-rod ends, you WILL
> destroy the rubber dust covers.  So, have new ones handy.
> 
> Larry   sandiego16V
 

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org