[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TECH] Brake Lines
if you plumb the right front into the one chamber, you MUST plumb the
left rear into the same chamber. the brakes are in a diagonal circuit.
right front/left rear
left front/right rear
this helps to prevent total loss of stopping power should one chamber
fail (which does happen).
hth,
chrisg
--- Jason <jason87vw@nac.net> wrote:
> Hey List,
>
> I have to attach the brake lines to the master cylinder. I do not
> know which
> brake line goes where! I have done a complete 16v conversion on my
> 81s.
> Also, I have been to that the brake lines need to be the same length
> !?!?!
> Can you tell me if the back brake lines go to the back of the
> cylinder and
> the front lines go to the front of the cylinder, and if adding unions
> and
> extra brake lines (to make them reach) will be a bad thing ?
>
> Thanks,
>
> Jason
>
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
> majordomo@scirocco.org
>
__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals.
http://personals.yahoo.com
--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org