RE: Fresh Air Blower

[John Erickson <hombre@elp.rr.com>]

There is only one bolt (driver's side) and it just spins.  The center mount 
is a push on clip.  the passenger side appears to be a sheet metal screw 
coming up from the bottom.  Does it just come apart in the middle (leaving 
the door in place)?

tks

John

At 06:46 PM 10/6/2001 -0500, Patrick Bureau wrote:
>remove rain tray, the big black bubble you see in the middle,
>remove the bolts, and tada right there !
>I just did this on mine thinking the resistor was dead (only 4th
>speed working on fan) turned out was a bunch of crap inside the
>area and after cleaning the electrical brushes, I got all speeds
>working again...
>
> > -----Original Message-----
> > From: owner-scirocco-l@scirocco.org
> > [mailto:owner-scirocco-l@scirocco.org]On Behalf Of John Erickson
> > Sent: Saturday, October 06, 2001 5:01 PM
> > To: scirocco-L
> > Subject: Fresh Air Blower
> >
> >
> > I have a replacement motor I bought fairly cheap from
> > Carparts.com.  I have
> > no idea if it will work or not.  I discovered this
> > afternoon that the
> > Bentley manual is pretty worthless on the removal of the
> > motor.  The manual
> > says I can get to it from the top (under the rain drip
> > tray with the wiper
> > motor, ECU, knock box, etc.), but that won't work.
> >
> > What's the easiest way to get it out?
> >
> > John
> > '87 16v (with a/c)
> >
> >
> > --
> > Email LIST problems to: scirocco-l-probs@scirocco.org.
> > To unsubscibe send "unsubscribe scirocco-l" in the
> > message to majordomo@scirocco.org
> >
> >


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org