[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Removing Rear Main Seal? [was: Need Fast Help: Stuck Removing Tranny]

To: scirocco list <scirocco-l@scirocco.org>
Subject: Re: Removing Rear Main Seal? [was: Need Fast Help: Stuck Removing Tranny]
From: Veedub <myjunkbox@home.com>
Date: Mon, 01 Oct 2001 12:14:28 -0400
In-Reply-To: <20011001154326.14536.qmail@web11307.mail.yahoo.com>
References: <27ECEE1382F61445B6F1AFAD1C2254AF59ED@com.chem-tronics.com> <20011001154326.14536.qmail@web11307.mail.yahoo.com>
Sender: owner-scirocco-l@scirocco.org

> Does anyone on the list have a method for installing
> the rear main seal.  I always get nervous doing this
> cause its so much work to get back there if you screw
> up.  I've used a hammer & a punch in the past.  Is
> there a better way?

Place the old seal between a 2x4 and the new one.  Tap away.

Jay

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org

References:
- RE: Removing Rear Main Seal? [was: Need Fast Help: Stuck Removing Tranny]
  - From: "Fry, Larry" <LEF@chem-tronics.com>
- RE: Removing Rear Main Seal? [was: Need Fast Help: Stuck Removing Tranny]
  - From: Anthony Pelletier <vwnuts@yahoo.com>

Prev by Date: RE: [tech] 16v Compression Test Results = Bad News!
Next by Date: RE: transmission problem!!
Prev by thread: RE: Removing Rear Main Seal? [was: Need Fast Help: Stuck Removing Tranny]
Next by thread: Good news bad news kinda day...
Index(es):
- Date
- Thread