[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Valve clearance with big cam

To: <WaspHwy@aol.com>, <mk1gti@egroups.com>
Subject: Re: Valve clearance with big cam
From: VeeWdriver@aol.com
Date: Wed, 14 Nov 2001 13:12:17 EST
Cc: <scirocco-l@scirocco.org>
Sender: owner-scirocco-l@scirocco.org

Don't have the specs in front of me, but, as far as turning the cam, put the pulley on and the big bolt and use a socket with 1/2" breaker bar.  If you use a ratchet it will jump after the tip of the lobe comes around and you will not be able to turn it accurately (slowly).

Tom

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org

Prev by Date: $1 and now it's faster... (and removing that stupid compressor)
Next by Date: FN vs. 4K?
Prev by thread: Valve clearance with big cam
Next by thread: $1 and now it's faster... (and removing that stupid compressor)
Index(es):
- Date
- Thread