RE: Crimps (was solder vs. crimp)

["Fry, Larry" <LEF@chem-tronics.com>]

Brad- 
  If you are going to use a crimp-connector, I believe a butt connector is
required.  Everyone is saying that the un-insulated type is the best and you
must use shrink sleeving for this type.

Larry  sandiego16V
old crock and his old 'Roc

-----Original Message-----
From: Brad Sterling [mailto:bgsterling@earthlink.net]
Sent: Wednesday, November 14, 2001 8:53 AM
To: Scirocco List
Subject: Crimps (was solder vs. crimp)


<snip Dave>
* This
> > is why the generic 3 wire 02 sensors that you can get from Bosch have
> > the crimps on them and includes a note on what to do.
<end snip>

Does someone have a picture/description of these crimps?  I'm wanting to use
them for the generic O2 sensor I bought, but it didn't come with any crimps,
just a non-Roc plug.  A place to find them, part number, picture, etc. would
help since I assume we're not talking about generic spade/bullet connectors
here.  TIA.

- Brad
'86.5 Volkswagen Scirocco 16v
'76 International Scout II



--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org


[Disclaimer]This e-mail is strictly confidential and intended solely for the
addressee. It may contain information which is covered by legal,
professional, or other privilege. If you are not the intended addressee you
must not use, disclose, or copy this transmission. This E-mail is not
intended to impose nor shall it be construed as imposing any legally binding
obligation upon GKN Aerospace Chem-tronics Inc. and/or any of its
subsidiaries or associated companies. Neither GKN Aerospace Chem-tronics
Inc. nor any of its subsidiaries or associated companies gives any
representation or warranty as to the accuracy or completeness of the
contents of this E-mail. GKN Aerospace Chem-tronics Inc. shall not be held
liable to any person resulting from the use of any information contained in
this E-mail and shall not be liable to any person who acts or omits to do
anything in reliance upon it.


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org