[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: stroker cranks
Scott, It's Bore X Bore X Stroke X 3.14. W/ 82.5's & the 95.5 crank you
would have a 2041cc.
The crank is from the TDI's.
Mike Potter
Virtual World Parts Inc.
Sales@parts4vws.com
714-633-9380
-----Original Message-----
From: owner-scirocco-l@scirocco.org
[mailto:owner-scirocco-l@scirocco.org]On Behalf Of Scott F. Williams
Sent: Wednesday, November 07, 2001 6:20 PM
To: Scirocco List
Subject: stroker cranks
Here's a question for yuz:
95.5mm crank + stock 2.0l 16v motor = ??? cc displacement?
Also, in an otherwise stock motor, is the compression ratio changed? I've
gotta learn this engine internals stuff next...
P.S. The 95.5mm crank is from a TDI or some other diesel, correct?
--
Scott F. Williams
NJ Scirocco nut
Golf GTI 16v rallycar
Mazda 323 GTX turbo assault vehicle
ClubVAC: "Roads found. Drivers wanted."
Check out our rally team's website!
http://www.usrallyteam.com
--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org
--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org