RE: How tight should it be?

["Fry, Larry" <LEF@chem-tronics.com>]

sounds like the wheel bearing was not seated completely to begin with.  Keep
an eye on it, if that's it, it should stay tight after one or two more
"adjustments".
enjoy the ride.

Larry  sandiego16V


-----Original Message-----
From: Julie Macfarlane [mailto:juliemac57@hotmail.com]
Sent: Saturday, November 03, 2001 1:59 PM
To: scirocco-l@scirocco.org
Subject: How tight should it be?


That got your attention I am sure...
The rear wheel bearing I replaced last weekend worked loose again. I 
tightened till I could just move the washer under the nut & replaced the 
cotter pin with a new one. Is this right?
I am also STILL getting the noise from the front of the car when the wheels 
roll. At 30 mph it clicks or rubs at about twice a sceond. The wheels are 
rolling fatser than that. Any ideas guys?

Sorry bout the teaser subject line (not!)

>>THOUGHT FOR THE DAY:
Never be afraid to try something new.
Remember that amateurs built the ark. . . . .
Professionals built the Titanic.

Julie Macfarlane
(Web Developer)
Albany NY
'81 8v-FF (FronkenMom)
'81 16v-2Y (FronkenDad)
ICQ: 7704980
http://216.153.141.3/scirocco/


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org


[Disclaimer]This e-mail is strictly confidential and intended solely for the
addressee. It may contain information which is covered by legal,
professional, or other privilege. If you are not the intended addressee you
must not use, disclose, or copy this transmission. This E-mail is not
intended to impose nor shall it be construed as imposing any legally binding
obligation upon GKN Aerospace Chem-tronics Inc. and/or any of its
subsidiaries or associated companies. Neither GKN Aerospace Chem-tronics
Inc. nor any of its subsidiaries or associated companies gives any
representation or warranty as to the accuracy or completeness of the
contents of this E-mail. GKN Aerospace Chem-tronics Inc. shall not be held
liable to any person resulting from the use of any information contained in
this E-mail and shall not be liable to any person who acts or omits to do
anything in reliance upon it.


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org