RE: German Engineering -- From the BMW list. :)

["Fry, Larry" <LEF@chem-tronics.com>]

Hey, hey, hey....last time I checked this was a Scirocco list.

Larry  sandiego16V

-----Original Message-----
From: 16V Jason [mailto:jason@scirocco.org]
Sent: Friday, November 02, 2001 12:51 PM
To: scirocco-l@scirocco.org
Subject: German Engineering -- From the BMW list. :)


Heh, this is a fun coincidence.  No sooner than I wrote my last post to the 
list on this subject, I check my mail, and in from the BMW list is the 
following e-mail. :)

Enjoy!
Jason


-----------FORWARDED MESSAGE--------------

From: "KKiely" <kkiely@tsmc.com>
To: bmwuucdigest@uucdigest.com
Date: Fri, 2 Nov 2001 11:22:42 -0800
Subject: RE: [uuc] (uuc) was E36 shimmy, now BMW rant.

Jason,
Amen to your frustration..... add seat cables that in 16 years are still
crap.
Maybe that rumor we heard on the digest about BMW talking with Toyota about
their valve timing solution is a first step.
-Kevin


From: "Daniels, Jason S" <JDANIELS@amfam.com>
To: <bmwuucdigest@uucdigest.com>
Subject: [uuc] (uuc) was E36 shimmy, now BMW rant.

Amen to that! The crap parts they keep turning out year after year that
would be easy fixes really is amazing. I love the cars but hate some of the
same continuos problems that have always been the same for the 12 years I
have been driving these cars. CHrist, I don't want to drive a Lexus but at
least they build them so they don't have all these small problems. Maybe BMW
should get some Japanese engeneers to build the A/C, Power steering pumps,
some of the suspension components, and electrical systems. It would save
them a bundle in warranty claims.
Jason Daniels
4 new VW's in the family ,still german, no warranty problems, cheaper, and I
still drive the OLD BMW's.



From: "Ed Walters" <teamdfle28@go.com>
To: <bmwuucdigest@uucdigest.com>
Sent: Thursday, November 01, 2001 3:49 PM


 > If you can move a front wheel backwards and forwards with your hands, the
front control arm bushings are shot. It's sad that BMW AG can't put a
bushing in these cars that lasts more than a couple years. The outer metal
shell of the E46 front control arm bushing is twice as long as the E30/E36
bushing and probably has twice as much rubber too. Unfortunately, the
bushing does not really last any longer in the E46. With 20k miles on my
2001 E46, I'm getting them replaced under warranty next week.
 >
 > The design was adequate in a 2500lb '84 E30 318i with small tires and
brakes. The bushing doesn't even come close to being adequate on a 3300lb
E46 with more than twice the HP and lots of tire. I hope the engineer at AG
who specified the current bushing was sent out immediately for his/her MBA
before any more damage was done. This kind of engineering leads to other
horrors such us the under-reinforced E36 rear subframe mounts and the
magically disapperaing rear suspension.
 >
 > Or, perhaps, this is just the Camryization of the ultimate driving
machine.
 >
 > Ed
 >


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org


[Disclaimer]This e-mail is strictly confidential and intended solely for the
addressee. It may contain information which is covered by legal,
professional, or other privilege. If you are not the intended addressee you
must not use, disclose, or copy this transmission. This E-mail is not
intended to impose nor shall it be construed as imposing any legally binding
obligation upon GKN Aerospace Chem-tronics Inc. and/or any of its
subsidiaries or associated companies. Neither GKN Aerospace Chem-tronics
Inc. nor any of its subsidiaries or associated companies gives any
representation or warranty as to the accuracy or completeness of the
contents of this E-mail. GKN Aerospace Chem-tronics Inc. shall not be held
liable to any person resulting from the use of any information contained in
this E-mail and shall not be liable to any person who acts or omits to do
anything in reliance upon it.


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org