Re: HELP, need Coil info ASAP

[Cheapass Ron <rapieper@yahoo.com>]

OK Randy...tell me what this mystery box is supposed
to do, and maybe I can help!!

Ron
Up at 5:15,been online for an hour!

--- Randy B <sirocco@telocity.com> wrote:
> Ok you PANSIES, am I the only one who stay's up till
> the wee hours of the
> night working on the Rocc......... JK :)
> I hooked up the Nology wires without the amplifier
> until I can clear this
> up. Please help if you can.
> I guess if you are a TRUE Rocc enthusiast you'd be
> out working on your car
> and not surfing the internet at 2am in the morn.
> like I am right now.
> I'm going back out to the garage to make sure I got
> the right wires to the
> right plugs and fire her up...........
> 
> Randy (no life, and a job that starts at 11am every
> day, working on the
> Rocc's till 1am most every night)
> 81 Scirocco S (X2) - "The Twins"
> 
> ----- Original Message -----
> From: "Randy B" <sirocco@telocity.com>
> To: <scirocco-l@scirocco.org>
> Sent: Wednesday, May 09, 2001 11:39 PM
> Subject: HELP, need Coil info ASAP
> 
> 
> > I am in the middle of installing the Nology wires
> on Mars (1981 Scirocco)
> > Need some info...
> >
> > The coil amplifier has two wires, Red+ and Black-
> > I assumed there would be a red wire that went to
> the (+) side of the coil
> > that would show 12V on the volt guage.....I was
> wrong.
> >
> > When I pulled the coil, I noticed that the - side
> of the coil had a red
> and
> > green wire (together in a plug) on it (#1)
> > and the + side had two black wires pluged in
> seperately (#15)... I was a
> > little dumbfounded.
> >
> > I went out and checked Cosmos's coil and found the
> same thing.
> >
> > I tested all the wires with a volt meter and
> found:
> > Green 0.00  with ignition on and 0.00 when
> attempted start
> > Red 0.8v with ignition on and 0.8v " "
> > Black 12.?v " " and 12.?v " "
> > other Black 0.0v " " and 0.0v " ".
> >
> > Do I hook the Red+ wire from the coil amplifier to
> the red wire going to
> the
> > (-) side of the coil that is showing 0.0v in my
> tests, or do I hook it up
> to
> > the black (+ side of coil) wire that is showing
> 12V.
> >
> > Do I then hook the Black wire to ???????
> >
> > Any help ASAP would be greatly apreciated so I can
> get this installed and
> > get some shut-eye without blowing up my new coil.
> >
> > Thanks,
> >
> > Randy
> >
> >
> > --
> > Email LIST problems to:
> scirocco-l-probs@scirocco.org.
> > To unsubscibe send "unsubscribe scirocco-l" in the
> message to
> majordomo@scirocco.org
> >
> >
> 
> 
> --
> Email LIST problems to:
> scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the
> message to majordomo@scirocco.org
> 


__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org