Re: a/c removal bracket (16V)

[SII2L16V@aol.com]

In a message dated 3/20/01 8:06:47 AM Pacific Standard Time, 
btpeet@effervescent.com writes:

> Either route you go, you'll need a different pulley with a longer
>  "extension".  Good luck.

not necessarily.  i recently did this conversion but i modified/hacked a 16v 
a/c bracket from a 2.0 not from a 1.8.  anyway, i didn't have to use a 
different pulley.  i used a spacer that was on the alternator from from an 
a2.  it lines up perfectly! HTH

mp

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org