Re: distrib cap and rotor

[T Berk <tberk@mindspring.com>]

> Richard Earley wrote:
> 
> This might be a simple question but a good one.  When changing the cap
> and rotor, the manuel I have says the the rotor button is mounted with
> an adhesive inside the distributor, and that you have to crush it with
> a pair of pliers to remove it.  If so how do I mount the new one.  The
> rotor button from the auto parts store has no adhesive.
> 
> Scott


Is this a 16v with it's Dist on the Horizontal? Or is it the earlier
type with the shaft vertical. If the latter I would not worry with
gluing it down again.

Look for some HiTemp Epoxy if you want to affix the thing, let it dry
overnight with he cap off to avoid out gassing problems.

(I have never glued on down, take it with a pinch).

TBerk
8 valver

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org