Re: polished intake prep

["Ryan McCarthy" <rmccarthy777@msn.com>]

I'm also interested in any suggestions for this because I polished my V/C
last year and I have to keep repolishing once a month.

Ryan



> Finally my car goes in on Tuesday for its new P&P head, Schrick 260/276
cams,
> and polished 50mm intake.  I just finished running 4 cans of brake cleaner
> through the upper and lower intakes to get any/all remnants of the
polishing
> compound and other crap outta there.  I then attempted to spray the
polished
> <properly cleaned and prepped> valve cover with clear high-temp engine
> enamel.  I laid on a thin first coat, and the crap started to dry gray in
> some areas.  Shit!  I have since knocked it all off with brake cleaner and
> once again have a shiny (but unprotected) cover.  I haven't done anything
> to the outside of the upper intake yet.
>
> What did I do wrong, or what should I use - if anything?  The intake I'm
not
> so worried about, as it's easy to get at should it need a good shining up
> from time to time, but the valve cover will be buried and needs some kind
> of protection..
>
> --
> Kevin Collins
> Huntington Beach, CA
> '86.5 16V 2.0
> '00 Passat GLS 1.8T
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org
>



--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org