Re: [tech Q] 95.5mm crankshaft, what models?

[Brett Van Sprewenburg <brett@netacc.net>]

>>From: Randy Block <RandyB@E-Risk.com>
>
>
>>I am trying to find out what model 2.0L 4cyl VW's came with the 95.5mm
>>forged crankshaft.
>
>It came on the TDi's (1.9l displacement)
>
>>Also does anyone remember how to calculate displacement based on 
>>stroke and bore?
>
>convert mm to cm. divide bore by 2. (to get radius)
>area of piston is (pi)(radius)^2
>multiply area by stroke.
>multiply by number of cylinders
>
>so for 83mm pistons and a 95.5mm stroke you get:
>
>(3.1415)(8.3/2)(8.3/2)(9.55)(4)= 2066.8  (2.1l)
>
>HTH,
>Jonas

Or, with slightly less math (83mm pistons, 95.5mm crank):

(83 * 83 * 95.5 * 3.14) / 1000 = 2065.8

which is close enough for most government work IMO. :)

==Brett

 \/  '84 Scirocco (ITB racer 2B) | "Hot VW's, take two home. They're small"
\/\/ '88 Scirocco 16v (Show), '92 Passat 16v (Winter+) | - brett@netacc.net

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org