Re: fuel mixture

[Gary Huff <scirocco86@home.com>]

10ma is what the 16v Scirocco should run. Set it to 5ma if you like more mid-range pull, but slightly less low end torque. Don't forget to set idle stabilizer valve duty cycle, and timing first though....
	-Gary Huff

On Mon, Jun 25, 2001 at 07:18:30PM -0400, Brad Sayer wrote:
> Ok, so now another person has told me that the fuel mixture on a 16V should 
> be set by getting 5ma at the differential pressure regulator (DPR).  But, I 
> just read the hole section in the bently and it says 10ma (in 2 different 
> places, no less).  This is for a CIS-E 16V as per the usual 
> Scirocco/Cabriolet Bentley manual.  Could a GTI 16V be 5ma while a Scirocco 
> 16V is 10ma?  That would explain the confusion I believe.
> 
> Which is right: 5ma or 10ma?  Its a pretty big difference.
> 
> Brad
> 
> 87 16V
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
> 
> 
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
> 

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org