Re: Help!

["VW FREAK" <farmracer@mindspring.com>]

first of all, I cannot use any of the CIS lines b/c the fittings are
different size on CIS-E- 13 mm hex head v.14 mm hex head on the banjo bolts.
I could not put the cold start injector in the stock location on the
manifold I am using cause it is a Fox manifold and the injector would hit
the firewall, so I put in the "stock" location for a scirocco which is on
the passenger side end of the manifold.
this is a Fox manifold with an 86 GTI head and an Audi 3A block, CIS-E
injection (hopefully)
Ken N
1979 Scirocco 8V 2.0 Transplant in Progress
1985 Scirocco Wolfsburg 8V
1988 Jetta GLS 8V
1989 Jetta Carat GLI 8V STR-4
http://www.mindspring.com/~farmracer/slidehawk.htm

----- Original Message -----
From: "Brian Honnold" <bhonnold@pac-cap.com>
To: "VW FREAK" <farmracer@mindspring.com>; <vwautox@yahoogroups.com>; "NCVW"
<NCVW@yahoogroups.com>; <scirocco-l@scirocco.org>
Sent: Thursday, June 21, 2001 6:13 PM
Subject: RE: Help!


> How is the line to short?  What motor/injection combo are you using?
>
> Brian H
>
> > -----Original Message-----
> > From: owner-scirocco-l@scirocco.org
> > [mailto:owner-scirocco-l@scirocco.org]On Behalf Of VW FREAK
> > Sent: Thursday, June 21, 2001 3:52 PM
> > To: vwautox@yahoogroups.com; NCVW; scirocco-l@scirocco.org
> > Subject: Help!
> >
> >
> > anyone got any idea on how I can lengthen a CIS-E fuel line? I am
putting
> > CIS-E into my 79 Scirocco, and the line for the Cold Start Injector is
> > maybe... 1.5-2 inches too short.
> > Ken N
> > 1979 Scirocco 8V 2.0 Transplant in Progress
> > 1985 Scirocco Wolfsburg 8V
> > 1988 Jetta GLS 8V
> > 1989 Jetta Carat GLI 8V STR-4
> > http://www.mindspring.com/~farmracer/slidehawk.htm
> >
> >
> >
> > --
> > Email LIST problems to: scirocco-l-probs@scirocco.org.
> > To unsubscibe send "unsubscribe scirocco-l" in the message to
> > majordomo@scirocco.org
> >


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org