Re: Helps with belts and stuff

["Patrick Bureau (aka: Patric de Long Coeur)" <patricdlc@hotmail.com>]

Slow down, hehe you dont need to remove anything, just slacken the A/C bolts 
and use the tensionner to slacken that belt/tighen it, the power steeing 
pump working on the same principale, slacken the 43 ounting bolts and 
slacken the tensioner bolt and change the belts.


----Original Message Follows----
From: Captnbr@aol.com
To: scirocco-L@scirocco.org
Subject: Helps with belts and stuff
Date: Tue, 12 Jun 2001 12:37:29 EDT

The rubberband that runs the a/c compressor busted, so the alt is off line.
In order to replace this rubberband, i need to remove the waterpump/PS
rubberband.  I dont have the correct allen wrench to remove any of the
pulleys.

1.  Which is the correct sized allen wrench to remove the pully so i can
borrow the right one?

2.  How do i take off this belt?  In another words, which pulley do i remove
that would be the easiest,  The main one, the PS OR THE WATER PUMP.

3.  AND ONce i remove the pulley the belt will come right off,  right?

As you can see i am not a mech. but i like to do everthing myself and as 
long
as i have a good set of instructions i can do it.  Bently wasn't much help 
on
this one. Thanks everyone

I love my scirocco

Brian 86 Rocco 16v
and 98 Jetta GLX Vr6

<http://www.geocities.com/vwrocco16v/>

<http://hometown.aol.com/captnbr/myhomepage/auto.html>

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to 
majordomo@scirocco.org


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org