Re: Brakes and Q's (long)

[Cheapass Ron <rapieper@yahoo.com>]

--- timothy piwonka <t.piwonka@worldnet.att.net>
wrote:
> 
> >If you are replacing your pads you may need to
> recess the brake piston to
> >allow the pads to clear the new rotor.  For that
> you need a large allen key
> > (don't remember size).
> 
> This is s 12mm allen on my 16V, same on front and
> back
> 

Need a 12mm allen on the fronts?   Thought I used a
C-clamp and all was right in the world...hmmm...

=====
Ron (Cheapass)
'87 16V, ("Victor"), '93 Cabby ("Teufelhasen")
ICQ 108845455

If it ain't foggy, TURN OFF YOUR FOG LIGHTS.

__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org