Re: Need help - making CV flange spring depressor

[VWMikeLVW@aol.com]

In a message dated 1/4/01 10:35:25 AM Pacific Standard Time, 
scirocco@powerlink.net writes:


> I made mine with, I believe 10mm,  threaded rod and some 1" flat stock bent
> to form a square U.  It's a simple tool to make and cheap too.  Most
> industrial/welding supply shops carry metric threaded rod.  I think I paid
> around $5 for a 3' peice


You can also use a steering wheel puller if you have the correct size bolt to 
go through the center.

Mike
http://www.geocities.com/vwmikel
'84-Arkay Turbo Rabbit GTI
'84-Rabbit GTI - uh.....
'77-Rabbit - project
'80-Scirocco S - (um... to be:1.9L crossflow, turbo, 6 speed, widebody?)