[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: upgrading to g-grind cam
On Mon, 12 Feb 2001 23:05:49 EST WaspHwy@aol.com writes:
> hi, I am planning on upgrading the cam in my 84 gti to a g grind or
> TT's 268 sport cam. what all should I do while I have the cam out? i
have a
> new valve cover gasket (of course), but what about lifters (my dad, a
chevy
> guy, says you should always change lifters when you change a cam)
springs,
> etc? I would like to get as many things out of the way as far as
maintenance
> while I have it stripped down. thanks for any help
>
> mark j horzelski
The G grind is for solid lifters and the TT268 is for hydraulic heads.
I recently installed a G grind cam in my '83 GTI and it made a nice
difference.
Peter
'79 Scirocco 16V project car
'83 GTI "Caged Rabbit"
'84 Scirocco, RD/FF
'80, '88 Scirocco rollers
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org