[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

weird oil buzzer sounds



Probably the oil pressure control unit is faulty. It is located inside the 
instrument cluster behind the speedometer (small circuit board). To get to 
the unit you must first get the instrument cluster out. Then disasamble it 
by removing the 8 philliphs head screws located on the back of the cluster. 
Then pry out the printed circuit connectors from the cluster itself. Put the 
cluster on a table with the gauges looking towards you. Lift the front part 
upwards toward you. Then youll see a Small board behind the speedometer's 
face plate. This is the oil pressure control unit. Unlock the board from 
some small plastic pins that hold the board in place from it's sides. Pry 
the circuit board very carefully towards the face plate of the gauge. Then 
move it towards the upper part of the cluster and it shold come out. 
Installation is the reverse of removal. This procedure came from the Bentley 
Manual. If you dont want to do all this buy a used instrument cluster and 
install it instead of yours (you'll have to adjust the milage on it though).

Gabriel

'87 Scirocco 16v
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.


--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org