Removing valve in brake line?

[Randy Martinez <howlinmonkey16v@yahoo.com>]

I have a small leak coming from the bottom of a valve thingy that sists on
one of the rear brake lines, a little bellow the master cylinder. 
I think it may just be an old O ring causing the problem.
Now no matter what I do I cannot remove the thing or even nudge one of the
nuts to check. The tip part has an 11mm nut with a 15mm to hold while
turning the 11mm. The bottom need an 11mm as well for the line, but also
has a 22mm nut that seems to screw into the valve. I couldn't think of a
worse place for this thing to have been put, especially because you need a
damb 22mm on the bottompart. I hope someone knows what I am talking about
and can point out a simple way to take care of the problem.
TIA

=====
Randy
87 2.0l 16v Rice Eater
89 8v Gti (sold for Rocco)
Teaneck, NJ

__________________________________________________
Do You Yahoo!?
Check out Yahoo! Shopping and Yahoo! Auctions for all of
your unique holiday gifts! Buy at http://shopping.yahoo.com
or bid at http://auctions.yahoo.com

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org