Re: [mk1] brake light switch install

["Sal" <pellom@yorku.ca>]

Sorry, I should have mentioned that I used the 16V mc, 16V proportioning
valves,  as well as the 16V brake booster....I used the old brake pedal
cluster and added the switch.  Otherwise, you're right Peter, the pushrod
would be different.



Sal


----- Original Message -----
From: <thescirocco@juno.com>
To: <scirocco-l@scirocco.org>
Sent: Thursday, April 05, 2001 7:49 PM
Subject: Re: [mk1] brake light switch install


>
>
> On Thu, 5 Apr 2001 22:36:46 -0700 "Sal" <pellom@yorku.ca> writes:
> > Not necessarily!
> >
> > I did the swap last summer and my dad helped me in adding a switch
> > on the
> > brake pedal cluster.  You can add the switch by making a bracket.
> > There was
> > a place to add it to the cluster but then you need to find the wires
> > to wire
> > it in.
> >
> > HTH
> >
> > Sal
>
> The problem is when you try to use the Mk.1 brake booster with a 16V
> Scirocco 22mm M/cyl.,
> it bolts up, but the brake booster pushrod needs to be MODIFIED, because
> it doesn't fit right.
>
> The easiest and best way is to install a 16V S2 pedal cluster and brake
> booster.
>
> I think that all  '84 1/2 and up, Scirocco pedal clusters are all the
> same.
>
> Peter
> '79 Scirocco 16V project car, 16V Pedal Cluster, 7/8" M/cyl
> '83 GTI "Caged Rabbit", '84 GTI White For Sale
> '84.5 Oddball Scirocco JH/FF
> '79, '80, '84, '88 Scirocco rollers For Sale
>
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today!  For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org