[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 1.8L 16v Block in an 8v

To: green536@hotmail.com
Subject: Re: 1.8L 16v Block in an 8v
From: thescirocco@juno.com
Date: Sun, 19 Nov 2000 19:44:27 -0500
Cc: rabbit16v@prodigy.net, Scirocco-l@scirocco.org
Sender: owner-scirocco-l@scirocco.org

On Mon, 20 Nov 2000 00:29:54 GMT "Chris DeLong" <green536@hotmail.com>
writes:
> Better get a knock sensor system as you will be running about 14-1 
> compression ratio. The pistons are totally different than 8Vs.

<snip>
>  So, swap over the distributor drive parts, pistons, and viola!!  
<snip>

As long as he changes the pistons to 10:1 RD pistons, he should be
alright.

Peter
'79 Scirocco 16V project car
'83 GTI "Caged Rabbit" 
'84 Scirocco, RD/FF
'80, '88 Scirocco rollers

--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org

Prev by Date: re: how old
Next by Date: Re: How old? (was: Hi, I'm new)
Prev by thread: Re: 1.8L 16v Block in an 8v
Next by thread: Re: 1.8L 16v Block in an 8v
Index(es):
- Date
- Thread