Re: headlight relaying

["Andre' Bjorkheim" <andreb.mail@gte.net>]

Foxx (in a box) wrote:
> 
>   i'm in the process or relaying my lights and was just interested in
> what size (amp) fuse i should use. if it matters, i'm using 12g wire
> with the stock lights and 12v bosch relays. thanx.

   With the stock lights you can get away with 5 amp fuse for each
lowbeam (55w) and a 10 amp fuse for the highbeam (2x60watt).  I pretty
much do the following for the non-sealed units:

  55w  = 5 amp
  60w  = 5 amp
  80w  = 7.5 amp
  90w  = 10 amp
  100w = 10 amp
  130w = 15 amp
  
  The stock sealed beams generally run less amperage than their H4 & H1
non-sealed beam counterpart, so the diagram should cover ya.  HTH...

 Andre'
 Lime Green 79
 ICQ #76283458

--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org