[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Scirocco 16v Trans in MK1?
In a message dated 11/13/00 11:53:45 PM Eastern Standard Time,
roccolister@hotmail.com writes:
<< The only thing that needs to be done is to bring the
driveshafts and 100mm CV joints with it.
>>
Don't forget the hubs for the 100mm CV's. If you leave the 90mm hubs, the
100mm CV's will most likely bind up on the smaller hubs.
Stewart
--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org