Re: Strut bar

["Sal Guzzo" <pellom@YorkU.CA>]

Are there any other bars which fit a Mk1 Rocco with a 16V. Thanks

Sal

81 Scirocco S (16V to be)
81 Scirocco (motorless and directionless)
84 Rabbit (now Gti)
84 Scirocco Wolfsburg
67 Peugeot 404
----- Original Message ----- 
From: <thescirocco@juno.com>
To: <VeeWdriver@aol.com>
Cc: <scirocco-l@scirocco.org>
Sent: Tuesday, May 16, 2000 10:38 PM
Subject: Re: Strut bar


> On Tue, 16 May 2000 20:09:29 EDT VeeWdriver@aol.com writes:
> > Anybody know if the 16V Scirocco upper strut bar will fit on a Mk1 
> > Roc with a  16V in it?
> > 
> > 
> > Tom
> 
> It will not... Due to the low hood line on the Mk1.
> 
> I picked up a Mk1 GMP upper stressbar, that's right GMP...
> The strut mounts are offset, so if you flip it around the bar will run
> right along the firewall. 8^)
> 
> Peter
> '79 Scirocco 16V project car, GMP upper, 16V lower
> '84 Scirocco 2.0L
> '83 GTI 
> '80 Scirocco                                                             
>                                                                          
>                                                                          
>                                    '88 Scirocco 16V
> 
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk!  For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
> 
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org