RE: eurolight wiring

["Jonas Karlsson" <jonas85k@hotmail.com>]

>From: MLeach@enipower.com

>one question though why does the low beam connection jump over to the high 
>beam does this mean that the ground connection is the one being switched by 
>the headlight switch and not the power lead?

You're looking too hard into the problem, and missing the obvious. The "low 
beams" use H4's, which are dual filament bulbs. One filament for low, and 
one for high. When the highbeams are on, all 4 lights shine up in front.

You could use a second relay to power the lowbeams. Have the second relay be 
switched by the highbeam switch, and then connect the power leads in 
parallel to the power leads of the regular lowbeam relay.

Or just get 100W H1's and 80/100W H4's. That will be all you'll need.

IMHO, of course.

Jonas
85 Scirocco 2.0
For direct reply: jonas@metabolex.com
http://www.geocities.com/scirocco2l8v
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org