[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: quick help - someone with a bently
I don't remember any star bolts on the calipers. The rear calipers were
held on by two 8 or 10 MM allen head bolts. The piston needs a 12mm allen
wrench to turn it in.
Ian Overholt
'88 16v
'78 Champagne Edition
>From: "David Brown" <darthcar@hotmail.com>
>To: scirocco-l@scirocco.org
>Subject: quick help - someone with a bently
>Date: Sat, 18 Mar 2000 14:53:44 EST
>
>I have the back calibre partly off and need to finish the job. There is a
>star bit that holds the 2 bolts on. Anyone with a Bently tell me what size
>star it is. Looks like a six point. Need to replace the rotor also. The
>Hub nut is 30mm correct? Also the rear calibre has a hex head to screw in.
>What is is 10mm.
>
>The big one is the 2 bolts on the rear calibre.
>
>Help please
>
>David
>86 16v Black (always needing something)
>87 16v Red (work in progress!!!)
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
--
Email problems to: scirocco-l-probs@scirocco.org To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org