[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: brakes
Are you sure your pads are for an 8v car? It sounds like your new pads
might be for a 16v, which I believe are a tad bit thicker...which would be
enough to make it not fit.
Rich Deede
University Of Delaware (Communications)
1988 Scirocco 2.0 16v
1987 Scirocco 16v - R.I.P.
On Sun, 12 Mar 2000, Braden Sayer wrote:
> So, I go to replace my front pads and rotors (85 8V)today. Everything comes
> off just fine. Get the new rotor on, replace pad carrier, and pads. Now,
> the caliper won't fit because of newer thicker pad. Mr. Bentley tells me to
> push piston in to make room. The piston does not want to go anywhere by
> hand. It makes no mention of a clamp (even says to use a rubber band to
> hold it back!) Why won't the piston move back into the caliper? What am I
> doing wrong? Please help!
>
> Brad
>
> 85 8V
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
>
> --
> Email problems to: scirocco-l-probs@scirocco.org To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>
--
Email problems to: scirocco-l-probs@scirocco.org To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org
- References:
- brakes
- From: "Braden Sayer" <sayerbj@hotmail.com>