Re: break question.

["Craig Williams" <roccolister@hotmail.com>]

Jason,

I don't think you will have a problem as long as you have the correct pads
for a vented rotor. The pads are thinner to accommodate the thicker vented
rotor. All you should need to do when replacing the pads is specify that you
have vented rotors, and you should get the correct pads.

HTH -- Craig Williams
1981 SciroccoS 1.8 16V (soon to be 2.0+)
1987 Jetta GLI 16V (Daily Driver)
1991 Passat Wagon 2.0 16V (For the Wife)

----- Original Message -----
From: Jason Arms <redbug64@hotmail.com>
To: <scirocco-l@scirocco.org>
Sent: Tuesday, March 07, 2000 11:19 AM
Subject: break question.


> List,
>
> If say i owned a rabbit truck, and say it had 9.4 rotors on the front.
Lets
> just assume that i wanted to switch it to 9.4" vented rotors.  Would i
have
> to replace the calipers and spindle assemblies, or could i get away with
> just sliding in a fresh set of vented rotors.  or would that f**k me up
when
> i go to change the pads at a later date?  I don't have a rabbit truck :(,
i
> am asking this for a friend, but i would also like to know this.  TIA
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
>
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>
>

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org