[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Rear swaybar mk1 Scirocco
--- Brian Dettling <aa821@acorn.net> wrote:
> Read your post on Scirocco list. You probably know
> all this, but 16V
> rear bar works great partly because its 24 mm. OEM
> was something like 19-20
> mm. Roll bar stiffness varies with the 4th power of
> the bar diameter.
> MOF, long time ago I wrote VW&Porsche magazine about
> their pandering
> recommendation to 16V Scirocco guys to replace rear
> bar with 25mm
> Neuspeed. Never published, of course.
>
> Another data point: Drilling through the rear axle
> beam is a JOB.
==yeah, sure is - I did it on my 1980 Scirocco S.
BTDT
> with my 78 for GMP OEM work alikes.
==hehe, finally junked my old GMP swaybars last year .
. .
Need good drill
> bit and I used lotsa
> oil. I don't know for sure, but the 16V rear beam
> -may- be different in
> good way (beefier?) than earlier.
The 16V beam is the same, except pre-drilled for the
sway bar (as are all 1981 & later U.S. Sciroccos) and
possibly a notch for the rear disc mounting.
=====
Mark Peele
1981 Scirocco S, 1982 Scirocco, 1978 Scirocco, 1987 Golf GT
http://www.scirocco2.de/mark.htm
Direct Mail: SCIROCCO_GTX@YAHOO.COM
Need parts? try http://www.parts4vws.com/ (Potterman)
or http://www.germanautoparts.com/ (Adirondack)
or http://www.newdimensions.com/ (TurboTim)
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com
--
Email problems to: scirocco-l-probs@scirocco.org To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org